Tuesday, January 23, 2018

Tank Trouble Tuesday

The TankCam® inspection of this single-walled steel tank in Ohio showed widespread corrosion including pitting on an end cap, and definitively revealed to the site operator that their tank did not have an unused manway.

Read about more reasons for a TankCam inspection on our website, or follow Tank Trouble Tuesday.

Tuesday, January 16, 2018

Tank Trouble Tuesday

TankCam® inspections are frequently utilized for remote video inspections of older tanks or to identify suspected problems. However, inspections of brand new tanks can also provide valuable insights.

Tank inspections done after installation, but prior to the first fuel drop, verify that no tools or construction materials are left behind in the tank. Inspections also check for anomalies in the tank walls, changes in overall tank shape, and anything else that may have gone wrong, like STP shafts with significant oxidation shown in the GIF below.

For more details on inspections prior to an initial fuel drop, check out a case study from Tanknology Australia.





Tuesday, January 9, 2018

Tank Trouble Tuesday

A TankCam® inspection in Texas revealed a much bigger problem than site operators expected. Though they suspected a leak, the inspection revealed multiple cracks and points of ingress in the single-walled fiberglass tank.

Read more in the GIF below, and see more cases of water ingress investigations here on our blog.



Tuesday, January 2, 2018

Tank Trouble Tuesday

A fueling facility with four USTs that had been out of service for quite some time was recently evaluated using our VacuTect® tightness test and TankCam® inspection.

Read more about the visual inspection of the diesel tank in the GIF below.


Tuesday, December 26, 2017

Tank Trouble Tuesday

Tanknology carried out Petroscope® inspections on two tanks at a site in Wisconsin that was coming out of abandoned status and undergoing requirements to begin operations again.

As Petroscope inspections require the tanks to be completely empty and inerted with nitrogen, a thorough inspection of the full tank can be conducted. Read more about the findings of the inspection in the image below.

VacuTect® tightness tests were also performed on the single-walled fiberglass tanks, an important step in assuring the tanks' integrity. The tanks passed the tightness test.


Tuesday, December 19, 2017

Tank Trouble Tuesday

TankCam inspections® are often requested on a reactive basis -- looking to identify problems, or causes of leaks. But inspections can also be used for proactive causes, such as the inspection below carried out in Arizona.

The inspection identified severe flaking and peeling on the tank top, read more in the GIF below.


Tuesday, December 12, 2017

Tank Trouble Tuesday

The suspicion of a loose manifold pipe led to a TankCam inspection of a single-walled steel tank in Michigan.

The inspection confirmed the movement of the loose pipe as well as degradation to the bung and manifold. It is believed that the problem was caused by a cracked nylon bushing.

Read more of the story in the GIF below.