Tuesday, January 29, 2019

Tank Trouble Tuesday


A fueling facility in Tanknology's Ohio Valley region requested a TankCam® inspection of an 8,000 gallon lined, singlewall steel tank to visually confirm water ingress. 

The inspection revealed active ingress on the tank bottom and several areas that resemble possible points of ingress on the lower tank wall and endcap. The inspection also revealed a section of lining that had separated from the tank wall as well as lining damage around two corroded bungs. 

TankCam® video inspection services from Tanknology help you detect UST problems with no need for excavation or manned entry. TankCam is patent pending. 





Tuesday, January 22, 2019

Tank Trouble Tuesday




A fueling facility in Tanknology's Southern California region requested a TankCam® inspection of a 10,000 gallon singlewall fiberglass tank.

The inspection revealed severe flaking on most surfaces as well as a build up of sludge and liquid at the bottom of the tank. No cracks were observed in the tank but the TankCam inspection also found a broken tank stick at the bottom of the tank. While the tank was not currently in use, Tanknology recommended diligent monitoring of the leak detection results and periodic follow-up inspections to detect possible crack formation, until the tank can be repaired or removed.

TankCam® and PetroScope® video inspection services from Tanknology help you detect UST problems with no need for excavation or manned entry. TankCam is patent pending.






Tuesday, January 15, 2019

Tank Trouble Tuesday



A retail fueling facility in Tanknology's Southeast region requested a TankCam® inspection of their singlewall fiberglass tank to verify ingress in a tank that failed a VacuTect® tightness test. 

The TankCam inspection revealed bubbling from a leak under the product. The bubbling originated from a stress fracture along the side seam of the tank. 

TankCam® and PetroScope® video inspection services from Tanknology help you detect UST problems with no need for excavation or manned entry. TankCam is patent pending. 








Tuesday, December 18, 2018

Tank Trouble Tuesday

Water ingress investigations are a large portion of our Tank Trouble Tuesday features, but they can be complicated to pinpoint, as was the case in the fiberglass tank featured below.


Tuesday, December 11, 2018

Tank Trouble Tuesday

Operators of fueling sites with fiberglass tanks that were installed after the EPA 40 CFR part 280 UST regulations were launched in 1988 are now looking at a tank population that is between 20 and 30 years old.
Prudent operational practices suggest that it's time to evaluate those tanks and fueling systems – and get solid answers to some really important questions: What's the condition of the tanks? Can you get by with them for another 5 or 10 years? Do any need to be repaired or upgraded? Do any need to be replaced now? And if so, how do you prioritize them?
These can be tough questions to get good answers to. But those answers are important. If you could get a good look at the conditions inside your tanks, what would you see?
Check out our Aging Fiberglass UST Assessment Program to see more. 


Tuesday, December 4, 2018

Tank Trouble Tuesday

As every tank owner knows, underground storage tanks are major responsibilities. As the tanks age or change hands, UST owners may find it increasingly difficult to know the true conditions of their tanks.

TankCam visual inspections are the perfect tool to determining what's happening inside your tanks, including identifying the cause of a 50 gallon/day leak, as in this fiberglass tank.